English; Getting Started; Other Functions - AEG KM3 Série Mode D'emploi

ENGLISH

Thank you for choosing an AEG product. In order to ensure the best results, always use original AEG accessories and
spare parts. They have been designed especially for your product. This product is designed with the environment in
mind. All plastic parts are marked for recycling purposes.
COMPONENTS
. Motor head (tiltable)
A
. Speed selector
B
. Housing
C
. Tilt head locking button
D
. Front attachment hub
E
. Front attachment hub release button
F
G . Rear attachment hub cover
. Attachment shaft
H
. Stainless steel bowl
I
. Bowl clamping plate
J
Picture page 2

GETTING STARTED

1
Before using your appliance for the first time: Remove all packing material such as plastics, labels, stickers or tags
that may be attached to the housing, bowls or attachments.
Clean the appliance and accessories, see instructions: "Cleaning and Care".
2
Place the appliance on a flat surface. Push the tilt head locking button with one hand and tilt the motor head up
with the other hand. Once in up position it locks.
Caution! Ensure that the power cord is unplugged.
3
Set the speed selector to "OFF". Place the stainless steel bowl on the bowl clamping plate. Rotate the bowl clock-
wise to lock it into position.
Warning: Never operate the appliance with the wire whip, flat beater or dough hook unless the bowl is in place.
4
Place an attachment on the attachment shaft: Align the slot at the top of the attachment with the pin on the at-
tachment shaft. Push attachment up and turn it counterclockwise until the pin is locked into position.
To remove attachment, move it clockwise and pull off.
5
Tilting the motor head down: Push the tilt head locking button with one hand and tilt the motor head down with the
other hand. Insert the plug in the main socket.
Warning: Keep fingers and hands away from areas with movable parts.
6
Move the speed selector from "OFF" to desired speed (1-6). Once mixing is complete, turn the speed selector to
"OFF" and unplug the appliance.
Picture page 3
7
If the appliance is unplugged and the speed selector is left in speed mode (1-6):
The appliance will not start automatically. Turn the speed selector to "OFF", then turn it to the desired speed.

OTHER FUNCTIONS

8
Attachment hub: The appliance has with two built in multi-purpose attachment hubs, one in the front (A) and one in
the back (B). Read and carefully follow the instructions that comes with each attachment for correct and safe use.
HOW TO USE THE MEAT GRINDER*
9
Insert the grind screw (B) into the grinder housing (A). Place the knife (C) over the square shaft at the end of the
grind screw. Place the grinding plate (D) (medium or coarse) over the knife. Tighten the ring (E) by hand until the
meat grinder is secured.
Note: Do not over tighten the ring.
10
Push down the release button for the front attachment hub to the right and remove the attachment hub cover.
Fit the power shaft of the attachment in the front attachment hub socket, using the attachment hub release button.
The attachment release button will click into position once the meat grinder is securely attached. Place a container
www.aeg.com
EKM3xxx_Kitchen Machine_Electrlx - elias aeg.indd 6
. Non-slip feet
K
. Power cord
L
. Wire whip
M
. Coated flat beater
N
. Coated dough hook
O
. Slicer/Shredder *
P
Q . Meat grinder *
. Blender*
R
. Blender lid with measuring cup
S
* Certain models only
6
2017-05-24 17:06:05