Preparation For Work - Agu Octopy FP7 Mode D'emploi

8

PREPARATION FOR WORK

Read this manual carefully before use. Keep it for future reference.
Get the device and its accessories out of the box, remove all packing mate-
rials, promotional stickers and labels.
ATTENTION
Packaging material (film, foam, etc.) can be dangerous for children. The
danger of suffocation! Keep the packaging out of the reach of children.
Before using for the first time, wipe the case with a damp cloth. Rinse the
removable parts, container, blades, cooking basket, lids in soapy water or
in a dishwasher or under a stream of warm water with a mild detergent.
Be careful when handling blades: they are very sharp!
Dry the device and its parts.
FILLING THE WATER CONTAINER
1
Remove the decorative lid for water container (2) by gently pulling it.
2
Open the water tank screw cap by turning the plug (3) counterclockwise.
3
Fill the container with water, not exceeding the mark «MAX» (280 ml) on
the left side of the device.
4 Close the water tank screw cap by turning the plug (3) clockwise.
5
Place the decorative lid (2) back.
1
2
EN
MAX
MAX
280
MIN
100
ml
4
3
5
67