5.5 Compteur de mise hors tension / Power down counter
Le compteur de mise hors tension enregistre le nombre de fois où le compteur a été éteint /
registers the number of times that the meter has been turned off.
Remise à zéro du compteur de mise hors tension / How to reset the power down counter
•
Faire défiler jusqu'au Programme 3 /
•
Maintenir le bouton appuyé pendant 3 secondes pour entrer dans le menu /
menu.
Entrer un mot de passe à 4 chiffres: faire défiler et sélectionner chaque chiffre. Maintenir le bouton appuyé
•
pendant 3 secondes pour confirmer chaque chiffre /
each digit 0-9, hold the button for 3 seconds to confirm each digit.
Faire défiler jusqu'à la page Power down counter (PWEr C xxxx) /
•
xxxx).
•
Maintenir le bouton appuyé pendant 5 secondes pour entrer dans le programme /
enter program mode.
•
La valeur commence à clignoter: maintenir le bouton pendant 3 secondes pour remettre à zéro /
blinking: hold the button for 3 seconds to reset.
L'écran affichera OK quand
•
5.6 Mot de passe / Password
Le Programme 3 est protégé par un
with a password. The default password is 0000.
Changement du mot de passe / How to change the password
Faire défiler jusqu'au Programme 3 /
•
Maintenir le bouton appuyé pendant 3 secondes pour entrer dans le menu /
•
menu.
•
Entrer le mot de passe à 4 chiffres: faire un appui court pour modifier le chiffre. Maintenir le bouton appuyé
pendant 3 secondes pour confirmer chaque chiffre /
hold the button for 3 seconds to confirm each digit.
Faire défiler jusqu'à la page Password (PASSrd xxxx) /
•
•
Maintenir le bouton appuyé pendant 5 secondes pour entrer dans le programme /
enter program mode.
•
La valeur commence à clignoter: faire un appui court pour modifier chaque chiffre (de 0 à 9).
•
confirmer chaque chiffre en maintenant le bouton appuyé pendant 3 secondes /
to change digit value (0-9) confirm each digit by holding the button for 3 seconds.
•
L'écran affichera OK à la confirmation du mot de passe /
Scroll with the button to Program mode 3.
la valeur est réinitialisée /
mot de passe. Le mot de passe par défaut est 0000 /
Scroll with the button to Program mode 3.
Hold the button for 3 seconds to enter the
Enter the 4 digit password: scroll with the button and select
Scroll to LCD page Power down counter (PWEr C
The LCD will show OK when the value is reset.
Hold the button for 3 seconds to enter the
Enter the 4 digit password: short press to change digit 0-9,
Scroll to LCD page Password (PASSrd xxxx).
The LCD will show OK when the setting is confirmed.
The power down counter
Hold the button for 5 seconds to
The value starts
Program mode 3 is protected
Hold the button for 5 seconds to
The value starts blinking: short press
14