Initial Use; Settings; Setting The Time/Date - Sanitas SFT 53 Mode D'emploi

LCD display
1
2 3 4
12
E
11
10
9

5. Initial use

The batteries are already inserted in new de-
vices. Before first use, remove the protrud-
ing plastic insulating strip from the battery
compartment. The ear thermometer will then
switch on automatically.
1 Room temperature mode
2 Displays room temperature/
time/date
5
6 3 AM/PM display (time)
7
4 Battery symbol
8
5 Memory mode
6 No fever symbol
7 Temperature unit (°C or °F)
8 Fever symbol
9 Temperature display
10 Object temperature mode
11 Protective cap symbol
12 Body temperature mode

6. Settings

6.1 Setting the time/date

Before beginning to take measurements, we recommend that you
set the current time and date. This will allow you to organise the
saved measurements more easily later.
1. Press and hold the ON/OFF but-
ton on the switched-off de-
vice for three seconds. "24 H"
appears on the display.
2. Use the START button to select
the hour format (12h or 24h) and
confirm using the ON/OFF but-
ton .
3. The hour setting appears on the
display. Use the START button to
select the current hour and con-
firm using the ON/OFF button
4. The minute setting appears on
the display. Use the START but-
ton to select the current minute
and confirm using the ON/OFF
button .
20
.