Settings; Setting Fanspeed - Jaga DBH-SET Mode D'emploi

3.1. NOTIFICATIONS
Blue LEDs are flashing: the water temperature for cooling is too high
Red LEDs are flashing: the water temperature for heating is too low
Control panel error codes
LED flashes rapidly in the color of the set mode.
MODE MODE
MODE MODE
4. SETTINGS
4.1. SETTING FANSPEED
1. Select the mode that you want to adjust: Cooling
2. The unit runs at comfort speed.
3. Hold down [Mode] and [-] simultaneously until the first 4 LED's are flashing.
4. Short press [-] or [+] to adjust the preset speed.
50%
55%
60%
65%
70%
75%
80%
85%
Default factory setting of the fan speed is selected depending on the device's length in order to guarantee the sound levels..
5. The device returns to the selected mode. (±30sec).
32
Error sensor [7] - Check the water temperature sensor
Error sensor [6] - Check the room temperature sensor
15 sec
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE
MODE
MODE MODE
JAGA N.V. | DBH SET - TPT | MANUEL | 2021.03.25 | V.03
/ Heating
MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
MODE MODE
90%
95%
100%
105%
110%
115%
120%