Editing: Combining Files - Panasonic RR-XS450 Mode D'emploi

Editing: Combining fi les
2 files recorded on this unit can be combined into 1 file.
1
Select "COMBINE" in the editing setting
screen (➜ "Displaying the editing setting
screen", page 51).
2
Press +, – to select "PREVIOUS FILE" and
press [q OK] to enter.
3
Press +, – to select the fi le
to be combined and press
[q OK] to enter.
When selecting the file in another
folder, you can move within folder
hierarchies by pressing u. (For
details of file and folder selection
methods, see page 13.)
4
Press +, – to select "NEXT FILE" and press
[q OK] to enter.
5
Press +, – to select the fi le to
be combined at the back of
the previous fi le and press
[q OK] to enter.
52
52
6
Press +, – to select "NEXT" and press
[q OK] to enter.
7
Press +, – to select "YES" and press
[q OK] to enter.
While the files are being combined, the status
indicator flashes.
• If you press [F2 (CLOSE)] before combining is
complete, the combine process is cancelled.
*
Combined files cannot be returned to their original
state. It is recommended that you make backup copies
of the files in advance.
* If indexed files are combined, the indexing is erased.
* The combined file is saved in the same folder as the
previous files.
Files cannot be combined in following cases.
* Files in the MUSIC (M) folder, OTHER FOLDER (
recycle bin ( ) folder.
* When the battery indicator displays "
" ".
* Combining files from the internal memory with files
from the SD card.
*
If the total file size after combining will exceed 2 GB.
*
If there is less free memory space than the size of the
"NEXT FILE".
* If the recording mode of the two files is different.
) or
" (blinking) or