Direct Scene - Panasonic RR-XS450 Mode D'emploi

Direct scene

This function is for switching the recording scene (➜ page 20) linked to switching the microphone position. (The
factory setting is "ON")
You can switch to the recording scene assigned to each microphone position.
Microphone position
STEREO
ZOOM
Factory setting
* At the time of purchase, "MEETING" is assigned to STEREO, and "LECTURE" is assigned to ZOOM.
You can also change the recording scene assigned to a microphone position. Select the desired recording scene
from seven recording scenes. (➜ page 24)
* Switch the microphone position when the unit is in the stopped state. During an operation such as recording or
playback, the recording scene cannot be changed even by switching the microphone position.
* If you wish to switch only the stereo and zoom functions of the microphone without linking the recording scenes, set
direct scene setting to "OFF". (➜ page 24)
* When an external microphone is connected, the recording scene cannot be switched even by switching the
microphone position.
Recording scene
23
23