GreenWorks Tools 25237 Manuel D'utilisation page 14

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 3
English (Original Instructions)
WARNING: For your safety, it is required that the plug
attached to the machine is connected with the
extension cord. The coupling of the extension
cord must be protected against splash water,
be made of rubber or coated with rubber. The
extension cord must be used with a cable strain
relief.
The connection lead must be inspected for signs of
damage at regular intervals and may only be used if in
perfect condition.
INTENDED USE
The garden product is intended for domestic lawn mowing.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling
advice.
SERVICE
Servicing
requires
extreme
care
and
knowledge
technician. For service we suggest you return the product
to your nearest authorised service centre for repair. When
servicing, use only identical replacement parts.
This product has many features for making its use more
pleasant and enjoyable.
Safety, performance, and dependability have been given
top priority in the design of this product making it easy to
maintain and operate.
WARNING
The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety glasses
with side shields and, when needed, a full face shield.
We recommend Wide Vision Safety Mask for use
over eyeglasses or standard safety glasses with side
shields. Always use eye protection which is marked to
comply with EN 166.
DESCRIPTION
1. Power lever
2. Start button
3. Motor control cable
4. Upper handle
5. Lower handle
6. Height adjustment lever
7. Front wheel
8. Rear wheel
9. Grassbox
10. Wing nut
11. Bolt
12. Grassbox handle
13. Slots
14. Rear door
15. Rear discharge opening
16. Door rod
17. Hooks
18. Cord retainer
19. Blade
20. Blade insulator
21. Spacer
22. Blade nut
23. Front wheel cover
24. Split pin
25. Washer
26. Front axle
27. Rear wheel cover
28. Rear axle
29. Blade holder
30. Motor shaft
31. Block of wood (not included)
32. Wrench (not included)
SPECIFICATIONS
Lawn mower
25237
Voltage
220-240V~, 50Hz,
Power
1000W
Sound pressure level
L
= 78.8 dB(A) , K=3 dB(A)
PA
Sound power level
L
= 93 dB(A)
WA
<2.5 m/s
Maximum vibration
, K=1.5
m/s
2
Width of cut
350 mm
Height of cut
20 mm - 80 mm
No-load speed
3500 rpm
Grassbox capacity
40 L
Weight
12.78 kg
KNOW YOUR LAWN MOWER
The safe use of the product requires an understanding of
the information on the tool and in this operator's manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarize yourself with all
14
operating features and safety rules.
GRASSBOX
The grassbox collects grass clippings and prevents them
from being discharged across your lawn as you mow.
HEIGHT ADJUSTMENT LEVER
The height adjustment lever provides cutting height
adjustments.
MOTOR CONTROL CABLE
The motor control cable, located on the upper handle of
the mower, engages and disengages the motor and blade.
ASSEMBLY
UNPACKING
This product requires assembly.
■ Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
WARNING
Do not use this product if any parts on the packing list are
already assembled to your product when you unpack it.
Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
■ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
■ Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
2
■ If any parts are damaged or missing, please call your
Greenworks tools service centre for assistance.
PACKING LIST
■ Lawn mower
■ 2 lower handle pieces
■ 4 wing nuts
■ 2 bolts
■ Cord retainer
■ Grassbox
■ Operator's manual
English (Original Instructions)
If any parts are damaged or missing do not operate this
product until the parts are replaced. Using a product
with damaged or missing parts could result in serious
personal injury.
Do not attempt to modify this product or create
accessories not recommended for use with this product.
result in a hazardous condition leading to possible
serious personal injury.
To prevent accidental starting that could cause serious
personal injury, always disconnect from the power
supply when assembling parts.
Never operate the mower without the proper safety
devices in place and working. Never operate the mower
with damaged safety devices. Operation of this product
with damaged or missing parts could result in serious
personal injury.
ATTACHING THE LOWER HANDLE PIECES TO THE
MOWER BASE
2.
■ Align holes at the lower end of each handle arm with
posts extending from the mower base side plates.
■ Tighten them using the wing nuts provided.
INSTALLING THE UPPER HANDLE
3.
■ Align the holes on the upper handle with those on the
lower handle pieces.
■ Insert the bolts, and tighten them using the wing nuts
provided.
INSTALLING THE GRASSBOX
■ Lift the rear discharge door.
■ Lift the grassbox by its handle and place under the
rear door, so that the hooks on the grassbox frame are
seated into the slots in the handle bracket.
■ Release the rear door. When installed correctly, the
15
WARNING
WARNING
WARNING
WARNING

Publicité

Table des Matières
loading

Table des Matières