USRobotics ADSL2+ Guide D'installation Rapide page 13

Solution 3:
You need to verify the connection setting of your Web browser and that
the HTTP Proxy feature of your Web browser is disabled. You need to
do this so that your Web browser can read the configuration pages
inside your router. Launch your Web browser.
Internet Explorer users:
Click Tools > Internet Options, and select Connections tab.
1.
2. Select Never dial a connection, then click Apply.
3. Click OK.
4. Click Tools > Internet Options, and select Connections tab.
5. Click the LAN Settings button.
6. Clear all the check boxes and click OK.
7. Click OK.
Netscape Navigator 8.x users:
Click Tools > Options > General.
1.
2. Click the Connection Settings button.
3. Select Direct connection to the Internet, and then click OK.
I can't access the Internet.
Solution 1:
Make sure that all the Ethernet cables are properly and securely con-
nected and the power cord is plugged in.
Solution 2:
You can use the ping command to verify whether your computer has
successfully connected to the router. For ping command instructions,
User Guide
refer to the
Solution 3:
Make sure that your Internet settings are correct.
on the USRobotics Installation CD-ROM.
English
9