Select Mode; File Select Mode - Kenwood KDC-X590 Mode D'emploi

Function of Audio file

Select mode

Quickly selecting the file or folder you want to
hear.
1
Select the Select mode
Press the [F.SEL] button.
Display Select mode
1
"FILE SEL"* Refer to <File Select mode> (page 23).
"FLD SEL1"/"FLD SEL" Refer to <Folder Select 1 mode> (page 24).
"FLD SEL2"* 2 Refer to <Folder Select 2 mode> (page 24).
Exit the Select mode
• The Select mode does not function when <All
Random Play> (page 22) is ON.
• * 1 You cannot operate this function when <Random
Play> (page 22) is set to "ON".
• * 2 You cannot operate this function when <Switching
the Play mode> (page 25) is set to other than
"FOLDER" while playing ACDrive media.
2
Select the file/ folder
Refer to the explanation of the procedure
performed in each select mode.
Scrolling the file/ folder name display
Push the Control knob toward [FM] for at
least 2 seconds.
• You can cancel the announcement when selecting
the folder by <Voice Index> (page 33) during the play
of the ACDrive media. (KDC-X590/MP632U only)
• In the File Select mode, the <Voice Index> (page 33)
announcement is not made. (KDC-X590/MP632U only)
Function of Audio file

File Select mode

You can select an audio file in the folder currently
being played by file name.
1
Enter File Select mode
Press the [F.SEL] button.
Select the "FILE SEL" display.
Refer to <Select mode> (page 23).
File name display
Displays the current file name.
2
Select the file
Push the Control knob towards [4] or
[¢].
Switching between files in units of 10 songs
Push the Control knob towards [FM] or [AM].
With the [FM] button, you move 10 songs up and
with the [AM] button, 10 songs down.
• You can select File Select mode up to 999.
3
Decide the file to play
Press the Control knob.
The File Select mode releases, and the Audio file
being displayed plays.
23
|
English