Atag HG6471MBA Mode D'emploi page 25

ERRORS
SYMPTOM POSSIBLE CAUSE
Timer indicates There is an object, water or
error code F0 – F6 dirt on the buttons. Button
(if present). used for too long.
Ceramic glass plate Object fallen onto it.
broken.
SOLUTION
Ensure that there is nothing on the buttons.
Ensure that the buttons are clean and there is
no water on them.
Contact the technician if the error code does
not disappear.
Close the gas main switch and pull the plug
out of the socket. Contact the your installer.
Please note! Do not throw a broken
ceramic glass plate in the glass recycling
bin but take this to the Municipality's
waste recycling centre.
EN 7