Lullabies; Temperature Display; Using The Camera For Other End Devices; Access To The User Account Via The Web Portal (Pc) - Beurer babycare BY 99 dual Mode D'emploi

Note
If you have an Android™ end device, you can also record videos locally. To do this, tap the
video symbol (

10.6.3 Lullabies

You can activate one of five lullabies that will then be played over the camera:
1. Tap the note symbol (
2. Tap to choose your required lullaby. The lullaby now plays on the camera. To deactivate
the lullaby, tap it again.

10.6.4 Temperature display

Tap the thermometer symbol ( ). The current ambient temperature of the camera appears.
When you tap again on the thermometer symbol ( ), you can change the temperature dis-
play between °C and °F.

10.7 Using the camera for other end devices

To use the camera with other end devices, you must log in with the same username + pass-
word as your user account.

10.8 Access to the user account via the web portal (PC)

It is possible to access your user account via the web portal.
You will have received a link to the web portal automatically via e-mail after setting up the camera.
Note
The transmission image and the timeline can only be displayed via the web portal. Other func-
tions/settings options (such as the intercom function) are not available.

11. Useful information about the baby monitor

• If you operate the parent unit with the battery, this minimises electrosmog from electrical
and magnetic alternating fields.
• You can increase the range of the baby monitor by positioning the camera as high up as
possible near a door or window and ensuring that the battery is not too weak.
• Other radio waves may possibly interfere with the transmission of the baby monitor. There-
fore, do not position the baby monitor near devices such as microwaves, WLAN, etc.
• The following other factors can interfere with the baby monitor's transmission or shorten its
range: furniture, walls, houses, trees, environmental factors (such as fog, rain).
).
).
34