Initial Use Of Parent Unit With Mains Part Plug; Operating The Parent Unit; Infrared Night Vision; Set The Volume - Beurer babycare BY 99 dual Mode D'emploi

6. Press the ON/OFF button
on, the transmission image from the
camera is still switched off , an acoustic signal is emitted and the following symbol
appears on the monitor:

7.3 Initial use of parent unit with mains part plug

onn
1. C ect the small end of the "Monitor" parent mains part plug with the parent unit.
2. Connect the other end of the mains part plug to the socket.
3. The parent unit switches on automatically. Press the ON/OFF b
If the parent unit and camera are already switched on, the transmission image from
the camera will automatically appear on the screen of the parent unit.

8. Operating the parent unit

8.1 Infrared night vision

In order to ensure that clear transmission images can be seen on the screen even when it is
dark, the Video Baby Monitor automatically activates the infrared night vision in the dark. When
the infrared night vision is active, a moon symbol (

8.2 Set the volume

The parent unit has 5 volume levels.
To adjust the volume, press the (

8.3 Set the brightness

The parent unit has 5 brightness levels.
To adjust the brightness, press the (

8.4 Intercom function

The parent unit has an intercom function.
To activate the intercom function, hold down the (
into the unit. The words you have spoken can now be heard on the camera. To deactivate the
intercom function, release the (

8.5 Settings menu

You can adjust the following settings in the menu of the parent unit: zoom function, lulla-
bies, alarm, temperature unit, add/delete/view camera, alternating camera image and
power-saving mode.
• To access the settings menu, switch the parent unit on and press the (
lowing settings menu appears at the bottom of the camera screen:
to switch on the parent unit. If the camera is already switched
camera
will automatically appear on the screen.
.
) button or the (
) button or the (
) button again.
28
utton
to switch off the unit.
) is shown on the screen.
) button.
) button.
) button on the parent unit and speak
If the
) button. The fol-