Correcting The Date And Time - Nikon Lite Touch Zoom 110S Manuel D'utilisation

Correcting the date and time

(Lite Touch Zoom 110s QD only)
Press the MODE button to obtain the Year/
1
Month/Day indication.
2 Press the SEL button so that the indicator to be
set blinks.
Press the ADJUST button to set the blinking
3
digit.
Each time you press the ADJUST button, the number advances by one.
Holding the ADJUST button pressed for more than 2 seconds
advances the number quickly.
When the blinking indicator is correctly set,
4
press the SEL button again so that the next
indicator blinks.
Repeat steps 3 and 4 to set all the digits.
To correct the time, press the MODE button to obtain the Day/Hour/
Minute indication.
When the battery for the camera is replased, the date/time may be
reset. Be sure to check the day/time after replacing the battery and
correct if necessary.
38 Additional Information