Rewinding The Film; Removing The Film - Nikon Lite Touch Zoom 110S Manuel D'utilisation

Rewinding the film

Film starts to rewind automatically when film
reaches the end of the roll.
While the film is rewinding, the number on the frame counter decreases
one by one. Film is completely rewound when the frame counter shows
blinking " " for approx. 20 seconds in the LCD panel, then " " appears
without blinking.
If rewinding stops midway through the roll because of a dead battery, it
resumes automatically as soon as the battery is replaced.
Do not open the camera back until " " starts blinking.
To rewind the film in mid-roll.

Removing the film

Press the mid-roll rewind (
button using the stud on the
strap lug or a ball-point pen.
Once rewinding starts, there is no need
to keep the button pressed.
1 Confirm that film is
completely rewound.
Film is completely rewound when " " is
blinking in the LCD panel.
2 Open the camera back
and remove the film.
)
Basic Operations
En
23