Playback Panel; Key Lock / Unlock; Quick Operation - Velleman NVR3 Guide D'installation Rapide

8.5 Main Menu
Right-click anywhere on the screen to open the main menu. Right-click again to exit.
QUICK START
SYSTEM
EVENT INFORMATION
ADVANCED CONFIG
SCHEDULE SETTINGS
8.6

Playback Panel

Fast forward
Fast rewind
/ Play/pause
Stop
Slow playback Click once to get 1/4x speed playback, and click twice to get 1/8x speed playback.
Previous /
/
next hour
Quick search
Repeat
Backup
8.7

Key Lock / Unlock

To lock or unlock NVR local operation, click
When you unlock NVR local operation, the system asks you to enter a user name and password. The default
user name and password are both admin. These credentials give you access with the highest user level. For
more information, refer to the full user manual on the included CD-ROM.
9.

Quick Operation

9.1 Switching on/off and Rebooting
To power off or reboot the NVR:
In the quick menu bar, click
V. 02 – 01/12/2014
Click to set the status display, image settings, and date & time.
Click to set the system configurations.
Click to enter the event search menu.
Click to set CONNECTION, CAMERA, DETECTION, ALERT, NETWORK,
DISPLAY, RECORD, & NOTIFY.
Click to set record timer and event timer.
Increase the speed for fast forward.
Increase the speed for fast rewind.
Click to play the latest recorded video clip immediately, click again to pause.
In the pause mode, click
frame rewind.
Click to stop the video playback.
Click to jump to the next/previous time interval in an hour, for example,
11:00 - 12:00 or 14:00 - 15:00, and start playing the earliest event video clip
recorded during this whole hour.
Click to enter the quick search menu.
Click to set point A and point B in a video clip. The system will play only the specified
range in that clip.
Click to open the backup menu for video backup.
(lock) or
and then click
NVR3
once to get one frame forward, and click
(unlock) on the NVR status panel.
(power off) or (reboot).
7
to get one
©Velleman nv