Yamaha AV-S77 Mode D'emploi page 29

Enjoying DSP Programs
Press the DSP selector button (on the control
center) or DSP h (on the remote control).
DSP
Front panel
Each time this button is pressed, the DSP program is
selected in the following order and the currently
selected DSP program name is displayed.
When DSP on the remote control is pressed, the DSP
g
program is selected in reverse order.
VIRTUAL SURROUND
EFFECT OFF *
MONO MOVIE
CONCERT/SPORTS
HALL
* The "EFFECT OFF" appears only when using the DSP selector
button on the front speaker unit.
G When the headphones are connected:
SILENT CINEMA
y
• Be sure to select the DSP program best suited for the atmosphere
of the source being listened to.
• The last selected DSP program for each input source (VIDEO,
TV, AUX, DIGITAL 1 and DIGITAL 2) is stored in memory. So,
when the input source is changed, the DSP program is
automatically changed to the last selected one correspondingly.
STANDBY
– +
/ I INPUT DSP VOLUME
DSP selector button
h
or
DSP
g
Remote control
DOLBY DIGITAL/
DOLBY PRO LOGIC/DTS
DIGITAL MOVIE THEATER/
70 mm MOVIE THEATER/
DTS MOVIE THEATER
GAME
EFFECT OFF
DSP PROGRAM (DIGITAL SOUND FIELD PROCESSING PROGRAM)
AV-S77
POWER —— MEMORY ——
1
MENU LEVEL TEST
EFFECT
– +
ON/OFF
NIGHT
h
B. BOOST INPUT
g
h
I To cancel sound field effects
(using the remote control)
Press EFFECT ON/OFF.
The normal stereo playback is performed and
"EFFECT OFF" is displayed when the sound field
effect is canceled. Pressing this button again turns the
sound field effect back on.
I Processing indicators
When reproducing a source using the DSP program, a
processing indicator will light according to the functioning
status of the decoder or digital sound field processor.
q DIGITAL:
Lights when reproducing a source
encoded with Dolby Digital (5.1-
channel).
q PRO LOGIC: Lights when reproducing a source
encoded with Dolby Digital in 2-
channel, PCM audio or an analog source
using DSP program No. 2-2.
: Lights when reproducing a source
encoded with DTS.
DSP: Lights when reproducing a source using
DSP program No. 3-1 through 7.
• Depending on the input source (or signal format), the
appropriate indicator may not light. Or, even between
sources that are processed with the same decoding
system, the different indicator may light. In the DSP
program (1-1 through 3-3) that is automatically selected
by this unit, the DSP program name will be displayed
according to the indicator light.
y
• The VIRTUAL SURROUND, DOLBY DIGITAL/DOLBY PRO
LOGIC/DTS, DIGITAL MOVIE THEATER/70 mm MOVIE
THEATER/DTS MOVIE THEATER are the optimum programs
for reproducing visual software encoded with Dolby or DTS that
displays the g, s or
• The volume level of the right and left main channels may differ
depending on the input source being used because, except in the
case of Dolby Digital and DTS, sound field data as actually
measured are used.
• Select the DSP program that you feel sounds best for a source
regardless of its name. Besides, the sound field effect of the DSP
program is affected by the resonance of the listening room. To
enjoy the full performance of the DSP program, arrange the
furnishings so that your listening room has less resonance.
• Be sure to minimize the volume level of the TV to maximize the
virtual surround effect when reproducing a source with the
VIRTUAL SURROUND program.
2 3
DISPLAY
MUTE
EFFECT ON/OFF
+
h
DSP h/g
DSP VOL
–
g
logo marks.
27
E-