Ventilation Requirements; Operation; Control Panel; Switching Off - AEG AIK2023 Notice D'utilisation

Some functional problems
might occur for some types
of models when operating
outside of that range. The
correct operation can only
be guaranteed within the
specified temperature
range. If you have any
doubts regarding where to
install the appliance, please
turn to the vendor, to our
customer service or to the
nearest Authorised Service
Centre.
3.3 Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.

4. OPERATION

4.1 Control panel

4.2 Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator
button if all LED indicators are off.
1 2
4 3
• The manufacturer declines all
responsibility if the above safety
precautions are not observed.
• This appliance complies with the
E.E.C. Directives.

3.4 Ventilation requirements

The airflow behind the appliance must
be sufficient.
min.
5 cm
200 cm
CAUTION!
Refer to the assembly
instructions for the
installation.
Temperature indicator LED
1
FROSTMATIC indicator
2
FROSTMATIC button
3
Temperature regulator
4
ON/OFF button

4.3 Switching off

Keep touching the temperature regulator
button for 3 seconds.
All indicators light off.
ENGLISH 57
2
min.
200 cm 2