Temperature Regulation; Coolmatic Function; Holiday Mode; Childlock Function - AEG RKS638F6MX Notice D'utilisation

10 www.aeg.com
The display switches off.
2. Disconnect the mains plug from the
power socket.

4.4 Temperature regulation

Set the temperature of the appliance by
pressing the temperature regulators.
Default recommended set temperature
is:
• +4°C for the fridge
The temperature range may vary
between 2°C and 8°C for fridge.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.

4.5 COOLMATIC function

If you need to insert in the fridge
compartment a large amount of warm
food, for example after doing the grocery
shopping, we suggest activating the
COOLMATIC function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
1. Press the Mode until the
corresponding icon appears.
The COOLMATIC indicator flashes.
2. Press the OK to confirm.
The COOLMATIC indicator is shown.
This function stops automatically after
approximately 6 hours.
You can deactivate the COOLMATIC
function before its automatic end by
repeating the procedure or by selecting a
different fridge set temperature.

4.6 Holiday mode

This mode allows you to keep the
appliance empty during a long holiday
period reducing the formation of bad
odours.
1. Press the Mode until the
corresponding icon appears.
The Holiday indicator flashes. The
temperature indicator shows the set
temperature.
2. Press the OK to confirm.
The Holiday indicator is shown.
This mode switches off after
selecting a different
temperature.
4.7 ExtraHumidity function
In case of big quantity of vegetables and
fruits, to optimize the food preservation,
you can activate the ExtraHumidity
function.
1. Press Mode until the corresponding
icon appears.
The ExtraHumidity indicator flashes.
2. Press OK to confirm.
The ExtraHumidity indicator is shown.
To deactivate the ExtraHumidity function,
repeat the procedure until the
ExtraHumidity indicator turns off.

4.8 ChildLock function

Activate the ChildLock function to lock
the buttons from unintentional operation.
1. Press Mode until the corresponding
icon appears.
The ChildLock indicator flashes.
2. Press OK to confirm.
The ChildLock indicator is shown.
To deactivate the ChildLock function,
repeat the procedure until the ChildLock
indicator goes off.

4.9 DrinksChill function

The DrinksChill function is to be used to
set an acoustic alarm at the preferred
time, useful for example when a recipe
requires to cool down food products for a
certain period of time.
1. Press Mode until the corresponding
icon appears.
The DrinksChill indicator flashes.
The Timer shows the set value (30
minutes) for a few seconds.
2. Press the Timer regulator to change
the Timer set value from 1 to 90
minutes.
3. Press OK to confirm.
The DrinksChill indicator is shown.
The Timer starts to flash (min).
At the end of the countdown the "0 min"
indicator flashes and an audible alarm
sounds. Press OK to switch off the sound
and terminate the function.