Control Panel Features Of The Model 505 Temperature Management Unit - 3M Bair Hugger 505 Manuel De L'utilisateur

6 English
Bair Hugger Model 505 Temperature Management Unit Operator's Manual
Figure D. Control panel of the Model 505 unit

Control Panel Features of the Model 505 Temperature Management Unit

TEMPERATURE IN RANGE INDICATOR
The temperature in range indicator illuminates when the output air temperature is within the range
of the selected level.
MAIN POWER INDICATOR
The main power indicator illuminates when the unit is connected to a power source. This indicator
must be illuminated for any functions to operate.
ON/STANDBY
SYSTEM
Push this button to turn the unit either ON or OFF. The indicator directly above the switch
illuminates when the unit is ON.
OVER HEAT INDICATOR
The Over Heat Indicator illuminates and an audible alarm sounds when an over-temperature condition
is detected. To reset, turn the unit OFF and then ON, using the System ON/STANDBY button.
(Also refer to the Warnings section of this manual.)
TEMPERATURE INDICATORS
The temperature indicators illuminate up to the selected temperature level. When the unit is initially
turned on, none of these indicators are illuminated and ambient air will be delivered.
TEMPERATURE SELECT
Push this button to increase the temperature setting level by level to the desired setting. When the
temperature setting is at HIGH, push the button again to return to delivery of ambient air.