Options - AEG FSE62400P Notice D'utilisation

Masquer les pouces Voir aussi pour FSE62400P:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

CAUTION!
If children have access to the
appliance, it is advised to
deactivate AirDry as opening
the door may pose a danger.
How to deactivate AirDry
The appliance must be in programme
selection mode.
1. To enter the user mode, press and
hold simultaneously
the indicators
start to flash and the display is blank.

7. OPTIONS

Desired options must be
activated every time before
you start a programme.
It is not possible to activate
or deactivate options while a
programme is running.
Not all options are
compatible with each other.
If you have selected non
compatible options, the
appliance will automatically
deactivate one or more of
them. Only the indicators of
the options still active will
stay on.
7.1 ExtraHygiene
With this option you have better hygiene
results. During the last rinsing phase, the
temperature stays at 70 °C for at least 10
minutes.
How to activate ExtraHygiene
Press
, the related indicator comes on
If the option is not applicable to the
programme, the related indicator does
not come on or it flashes quickly for a
few seconds and then goes off.
The display shows the updated
programme duration.
and
until
,
,
and
2. Press
.
• The indicators
off.
• The indicator
flash.
• The display shows the current
setting:
= AirDry activated.
3. Press
to change the setting:
= AirDry deactivated.
4. Press the on/off button to confirm
the setting.
7.2 XtraDry
Activate this option when you want to
boost the drying performance. With the
use of this option, the duration of some
programmes, water consumption and
the last rinse temperature can be
affected.
The XtraDry option is a permanent
option for all programmes other than
and need not to be selected at
every cycle.
In other programmes the setting of
XtraDry is permanent and it is
automatically used in next cycles. This
configuration can be changed at any
time.
Activating XtraDry option deactivates
TimeSaver and vice versa.
How to activate XtraDry
Press
. The related indicator comes
on.
7.3 TimeSaver
This option increases the pressure and
the temperature of the water. The
washing and the drying phases are
shorter.
The total programme duration decreases
by approximately 50%.
ENGLISH
11
,
and
go
continues to

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Fes5360xzm

Table des Matières