Husqvarna 120iTK4-H Manuel D'utilisation page 7

Masquer les pouces Voir aussi pour 120iTK4-H:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 90
Deactivate the product before you move to another
area. Attach the transport guard when the product is
not in use.
Never put the product down unless you have
deactivated it. Do not leave the product
unsupervised when it is switched on.
Remove the battery before you pass the product to
another person.
Make sure that no clothes or parts of the body come
in contact with the cutting attachment when the
product is activated.
If anything jams in the cutting attachment while you
operate the product, stop and deactivate the product.
Make sure that the cutting attachment stops
completely. Remove the battery before you clean,
inspect or repair the product and/or the cutting
equipment.
Keep your hands and feet away from the cutting
attachment until it has stopped completely when the
product is deactivated.
Watch out for stumps of branches that can be thrown
out when you cut. Do not cut to close to the ground
where stones and other objects can be thrown out.
Watch out for thrown objects. Always wear approved
eye protection. Never lean over the cutting
attachment guard. Stones, rubbish, etc., can be
thrown up into the eyes which can cause blindness
or serious injury.
Listen out for warning signals or shouts when you
wear hearing protection. Always remove your
hearing protection as soon as the product stops.
Never work from a ladder, stool or any other raised
position that is not fully secured.
This machine produces an electromagnetic field
during operation. This field may under some
circumstances interfere with active or passive
medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical
implants to consult their physician and the medical
implant manufacturer before operating this machine.
Always hold the product with both hands. Hold the
product on the right side of your body.
Always stop the product, remove the battery and
make sure that the cutting equipment does not rotate
before you remove material that is wound around the
blade shaft or caught between the guard and the
cutting attachment.
The electromagnetic field during operation can
interfere with the active or passive medical implants.
The persons with medical implants speak to your
physician and the medical implant manufacturer
before operating this product.
Hold the weight of the product with the harness to
make it easy to operate.
Long-term exposure to noise can result in permanent
hearing impairment. Husqvarna recommends that
operators use approved hearing protection.
Never use a product that has been modified in any
way from its original specification.
1553 - 005 - 06.04.2021
Never use a product that is faulty. Carry out the
safety checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under the
maintenance heading.
Carry out an overall inspection of the product before
use. See the maintenance schedule.
Never allow anyone else to use the machine without
first ensuring that they have read and understood the
contents of the operator's manual.
Check the working area for foreign objects such as
electricity cables and animals, etc, or other objects
that could damage the cutting attachment, such as
metal items.
Faulty blades can increase the risk of accidents.
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
Always use approved personal protective equipment
when you use the product. Personal protective
equipment cannot fully prevent injury but it
decreases the degree of injury if an accident does
occur. Let your dealer help you select the right
equipment.
Use a protective helmet where there is a risk of
falling objects.
Long term exposure to noise can result in damaged
hearing. In general, battery powered products are
relatively quiet but damage can result from a
combination of noise level and long usage.
Husqvarna recommends that operators use hearing
protectors when using products for a longer coherent
time of a day. Continual and regular users should
have their hearing checked regularly.
WARNING:
the ability to hear sounds and warning
signals.
Read the warning
Hearing protectors limit
7

Publicité

Table des Matières
loading

Table des Matières