Hedge Trimmer Safety Warnings - Gardol GBH-I-650 Manuel D'utilisation

Stop the device.
• whenever you leave the lawnmower.
• To release a blocked blade.
• before checking, cleaning or working on the device
• after contact with a foreign object, to check the
device for damage
If the appliance starts abnormally vibrating, switch
the engine off and search for the cause immediately.
Generally, vibrations are a warning against operating
failure.
The ON/OFF switch must not be locked.
Before work, check the area for any hidden items such
as wire fences.
When working with this machine, do not use spare
parts other than those recommended by us. Using
spare parts not recommend by us can result in serious
injuries to persons or damage to the machine.
The protective equipment on the appliance is strictly
prohibited to be disassembled, changed, used in
conflict with the designation and it is prohibited
to attach any protective equipment of other
manufacturers.
When being blocked, turn the appliance immediately
off and remove the jammed item.
Do not run! Immediately remove cut
branches/knots from the work area to prevent injuries.
Watch out for falling branches!
Despite the observance of the operating instructions
there still may be some hidden residual risks.
CAUTION
Damage to health arising from vibrations
to hand and arms if the device is used for a
long time or if the device is not guided and
evaluated properly.
Vibration damping systems are no guaranteed
protection against white finger disease or carpal
tunnel syndrome. Therefore, it is necessary to
carefully check the state of your fingers and wrist
if you have regularly used the appliance for a
long time. If any symptom of the diseases above
appears, seek medical advice immediately. To
reduce the white finger disease risk, keep your
hands warm and take regular breaks during your
work.
CAUTION
Hearing damage
A longer stay in the immediate vicinity of the
running unit may cause hearing damage. Wear
ear protectors.
When working with the device, a certain level of
noise cannot be avoided. Noisy work should be
scheduled for hours, during which it is allowed by
statute or other local regulations. Adhere to any
applicable rest times and limit your working time
to the necessary minimum time. For your personal
protection and the protection of people nearby,
suitable hearing protection must be worn.
Noise emission information in accordance with the
German Product Safety Act (ProdSG) and the EC
Machine Directive: the noise pressure level at the
place of work can exceed 80 dB(A). In such cases
the operator will require noise protection (e.g.
wearing of ear protectors).
Please observe the following: according to the German
Machine Noise Protection Regulation from September
2002, this device may not be operated on Sundays
and Bank holidays or working days from 8pm to 7am.
Furthermore, it is forbidden to operate the machine at
the following times of day: from 7 a.m. to 9 a.m., from
1 p.m. to 3 p.m. and from 5 p.m. to 8 p.m.
Please do also consider any local regulations
concerning noise protection!

Hedge trimmer safety warnings:

Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material. A
moment of inattention while operating the hedge
trimmer may result in serious personal injury..
Carry the hedge trimmer by the handle with the
cutter blade stopped. When transporting or storing
the hedge trimmer always fit the cutting device
cover.
Proper handling of the hedge trimmer will
reduce possible personal injury from the cutter blades.
Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring or its own cord. Cutter blades contacting a
„live" wire may make exposed metal parts of the power
tool „live" and could give the operator an electric shock.
When cutting a limb that is under tension, be alert for
spring back.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
ENGLISH
EN
23