Maintenance; Maintenance Schedule - Honda F660 Manuel De L'utilisateur

8.

MAINTENANCE

The purpose of the maintenance schedule is to keep the tiller in the
best operating condition. Inspect or service as scheduled in the table
below.
Shut off the engine before performing any maintenance. Exhaust
contains poisonous carbon monoxide gas; Exposures cause loss of
consciousness and may lead to death. If the engine must be run,
make sure the area is well ventilated.
Use only genuine Honda parts or their equivalent for maintenance or
repair. Replacement parts which are not of equivalent quality may
damage the tiller.

Maintenance schedule

REGULAR SERVICE PERIOD (3)
Perform at every indicated month or
operating hour interval, whichever
comes first.
Item
Engine oil
Transmission oil
Air cleaner
Sediment cup
Spark plug
Belt tension
Throttle cable
Main clutch cable
Side clutch cable
Idle speed
Valve clearance
Combustion chamber
Fuel tank and filter
Fuel tube
( )
＊ Replace paper element type only.
(1) Service more frequently when used in dusty areas.
(2) These items should be serviced by your servicing dealer.
For commercial use, log hours of operation to determine proper maintenance
(3)
intervals.
(4) Check that there is no crack and abnormal wear-out in the belt, and replace if it is abnormal.
32
Each use
Check level
Change
Check level
Check
Clean
Replace
Clean
Check-adjust
Replace
Adjust
Adjust
Adjust
Adjust
Check-adjust
Check-adjust
Clean
Clean
Check
First Every
month
3 months
or
or
20 hrs.
50 hrs.
(1)
(2) (4)
After every 500 hrs. (2)
Every 2 years (Replace if necessary) (2)
Every Every
6 months year
or
or
100 hrs.
300 hrs.
( ) ＊
(2) (4)
(2)
(2)
(2)
(2)
(2)