General Power Tool Safety Warnings - Makita DGA404 Manuel D'instructions

ENGLISH (Original instructions)
1. Button
2. Red indicator
3. Battery cartridge
4. Slide switch
5. Battery indicator
6. Mode indicator
7. Shaft lock
8. Wheel guard
9. Bearing box
10. Screw
11. Lever
12. Lock nut
13. Depressed center wheel
SPECIFICATIONS
Wheel diameter
Max. wheel thickness
Rated speed (n)/No load speed (n
Overall length
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
Explanation of general view
14. Inner flange
15. Lock nut wrench
16. Ezynut
17. Abrasive wheel
18. Spindle
19. Arrow
20. Notch
21. Flex wheel
22. Plastic pad
23. Sanding lock nut
24. Abrasive disc
25. Rubber pad
Model
Spindle thread
0
With battery cartridge
BL1815N, BL1820
With battery cartridge
BL1830, BL1840, BL1850
With battery cartridge
BL1815N, BL1820
With battery cartridge
BL1830, BL1840, BL1850
Rated voltage
DGA404
100 mm (4")
6 mm (1/4")
M10
)
2.2 kg
2.4 kg
CORDLESS GRINDER SAFETY
ENE048-1
WARNINGS
Safety Warnings Common for Grinding, Sanding, Wire
Brushing, or Abrasive Cutting-Off Operations:
1. This power tool is intended to function as a
GEA010-1
grinder, sander, wire brush or cut-off tool. Read all
safety warnings, instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
2. Operations such as polishing are not
recommended to be performed with this power
tool. Operations for which the power tool was not
designed may create a hazard and cause personal
injury.
3. Do not use accessories which are not specifically
designed and recommended by the tool
manufacturer. Just because the accessory can be
attached to your power tool, it does not assure safe
operation.
4. The rated speed of the accessory must be at least
equal to the maximum speed marked on the power
26. Abrasive cut-off wheel/diamond
wheel
27. Wheel guard for abrasive cut-off
wheel/diamond wheel
28. Abrasive cut-off wheel
29. Diamond wheel
30. Thickness: Less than 4 mm (5/32")
31. Thickness: 4 mm (5/32") or more
32. Wire cup brush
33. Wire wheel brush
34. Exhaust vent
35. Inhalation vent
36. Dust cover
DGA454
115 mm (4-1/2")
6 mm (1/4")
M14 or 5/8" (country specific)
-1
8,500 min
348 mm
362 mm
2.3 kg
2.5 kg
D.C. 18 V
DGA504
125 mm (5")
6 mm (1/4")
2.3 kg
2.5 kg
GEB059-3
7