Introduction; Main Features; Installation; Accessories - Yamaha HY144-D Mode D'emploi

Masquer les pouces Voir aussi pour HY144-D:

Table des Matières

Introduction

Thank you for choosing a Yamaha HY144-D Audio Interface Card. The

HY144-D is a digital I/O card for HY card slots, and is compatible with the

Dante digital audio network over Gigabit Ethernet connections. To take full

advantage of the superior features and performance offered by your

HY144-D, and to enjoy years of trouble-free use, please read this owner's

manual carefully before using your card. After you have read the manual,

keep it in a safe place.

• Can send and receive uncompressed digital audio signals of 32-bit

96 kHz quality, with a maximum of 144 inputs/144 outputs.

• Redundant connections are supported with primary and secondary

connectors. Daisy chain connections are also supported.

• Indicators show communication status useful for troubleshooting.

Refer to the leaflet included with the card for installation.

Refer to the owner's manual supplied with each device for more information

about installation and removal.

• Owner's Manual (this document)

• Card installation instructions leaflet

• Dante Virtual Soundcard Token (leaflet)

HY144-D Owner's Manual

Table des Matières