Commissioning; Settings - Extel WESV 87052 Guide D'installation Et D'utilisation

d. Commissioning
Connect the 12 VDC output of the adapter to the monitor output black plug
Connect the mains adapter to a 230 V outlet.
To use your WESV 87053, it is recommended to use the remote control unit which includes
more functions than the monitor.
Press the On/Off button: «
e. Manual selection of the VIDEO 1 and VIDEO 2 input
Use the "AV" key of the remote control unit or the monitor to select the Video 1 or Video
2 mode of the monitor to watch the camera, according to the AV1 or AV2 input used (10
or 12 page 6)
f. Settings
For setting the volume, use directly the
remote control unit.
To access the different settings press the "MENU" key of the remote control unit or the
monitor.
Use the Vol+ and Vol– key of the remote control unit and the
to modify the parameters.
Use the arrow keys to go up or down.
The settings disappear after a few seconds of inactivity.
« BRIGHTESS »: the brightness of the image, if the image is too bright or too dark, set the
brightness.
« CONTRAST » : contrast of the image, an image too contrasted can be harmful for the
sight and mark the screen.
« COLOUR » : colour adjustment.
« NEATNESS » : Improve the quality of the image.
8GB
» of the remote control unit , POWER on the monitor.
& keys on the monitor or VOL + VOL - of the
IMAGE
LUMINOSITÉ
CONTRASTE
COULEUR
NETTETÉ
................................ 52
SELECT AJUSTER
CFI EXTEL WESV 87052 - 07/2009 - V1
& keys of the monitor
52
47
55
50