Troubleshooting - Agu Giraffe Mode D'emploi

sary to wipe the lens with a dry soft lint-free
cloth. After the cleaning procedure, the lens
surface should be crystal clear. As the lens
surface gets cool when the disinfectant solu-
tion evaporates, the thermometer should be
left for several minutes at room temperature
before use after cleaning.
3 Leave the device to dry in air at room tempe-
rature.
4 Store the device in a dry, clean and dust-free
place in accordance with the operating terms.
11

TROUBLESHOOTING

Description
Temperature data
is not displayed
properly
The device can't
switch on
Wrong (low)
readings
EN
Possible reasons
The sensor is too
close/too far from
the measured
surface
Low battery
Device damage
Ambient
temperature is
below +16°С
Ambient
temperature is
higher than +40°С
The IR sensor lens
is dirty
Solution
The distance from
the measured
surface to the
sensor should
be 3–4 cm (for
body temperature
measuring) and
3–5 cm (for object
temperature
measuring)
Replace
the battery
Contact
the service center
Ambient
temperature
should be in the
range from +16°С
to +40°С
Clean the lens
according to
item 10 of this
instructions
manual
43