Agu Giraffe Mode D'emploi page 41

OBJECT TEMPERATURE MEASUREMENT
1 To measure object temperature, switch on
the device by pressing the button
2 The result of the previous measurement will
be shown on the display (when measuring
previously).
3 Bring the thermometer to the measured
surface so that there is a distance of 3–5 cm
between the sensor and the surface.
4 Press the START button 2 times and release.
The thermometer will be switched to the
measurement mode and take temperature
of the object.
5 The result of the object
temperature measure-
ment appears on the device
display. The thermometer
will signal the measurement
completion by a sound signal and by the
display backlight.
ACTIVATE OR INACTIVATE LIGHT AND SOUND
NOTIFICATION
To activate the light and sound notification, it needs
to enter the settings mode.
As the thermometer off, hold the START button for
3 seconds.
You will see the icon of the adjustable parameter on
the device display
or OFF (sound off).
Press the START button to turn the sound notifica-
tion on or off.
Wait for 3 seconds and the thermometer will switch
to the light notification mode.
You will see the icon of the adjustable parameter on
the device display
or OFF (light off).
EN
and the status ON (sound on)
and the status ON (light on)
once.
41