Personnel Qualification; Personal Protective Equipment - WIKA MH-4 Mode D'emploi

3. Safety

3.4 Personnel qualification

EN
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be personnel
who, based on their technical training, knowledge of measurement and control
technology and on their experience and knowledge of country-specific regulations,
current standards and directives, are capable of carrying out the work described and
independently recognising potential hazards.

3.5 Personal protective equipment

The personal protective equipment is designed to protect the skilled personnel from
hazards that could impair their safety or health during work.
The design of the personal protective equipment must take into account all operating
parameters of the place of use.
The requisite personal protective equipment must be provided by the operating company.
8
WARNING!
Risk of injury should qualification be insufficient
Improper handling can result in considerable injury and damage to
equipment.
▶
The activities described in these operating instructions may only be
carried out by skilled personnel who have the qualifications described
below.
WIKA operating instructions pressure sensor, model MH-4