Charging The Battery; Removing The Battery; Getting Started - Vax Air Cordless U86-AL-B-E Mode D'emploi

PLEASE READ 'LET'S TALK SAFETY' AT THE BEGINNING BEFORE USE
WARNING: The battery used in this device may present a risk of fire or chemical burn if mistreated.
Do not disassemble or heat above manufacturer's maximum temperature limit (60° C/140°F) or
incinerate. Replace battery with Vax battery only. Use of another battery may present a risk of fire or
explosion. Dispose of used battery promptly. Keep away from children. Do not disassemble and do
not dispose of in fire. Do not attempt to disassemble the battery or remove any component projecting
from the battery terminals. The battery and charger have no user serviceable parts. Fire or injury
may result. Prior to disposal, protect exposed terminals with heavy insulating tape to prevent shorting.
CAUTION: For best performance terminals on battery, battery charger and stick vac must be clean
and free from dust and dirt. Do not attempt to recharge non-rechargeable batteries.

Charging the battery

Fit the battery onto the
battery charger.

Removing the battery

Press the release
button, hold base of
battery charger and lift
the battery to remove.
NOTE: The life expectancy of the battery will vary depending on the usage of the stick vac.
If you require a replacement battery contact us: servicecenter@vax.de
The battery charger light will
turn blue when charging. If
a red light appears an error
has occurred, remove the
battery and refit.
To check how much life is left
on the battery, press down on
the battery button and see the
battery life indicator.

Getting started

25% Charged
50% Charged
75% Charged
The battery will be fully
charged after 3 hours and
the charger light will turn off.
IMPORTANT: The battery will need
fully charging before first use.
NOTE: The battery can remain on the
battery charger once fully charged.
You may want to charge the spare
battery so it is ready to use.
25