Using Your Machine - Vax Air Cordless U86-AL-B-E Mode D'emploi

Using your machine

Assembling your stick vac
Push the handle into the
body of the stick vac.
The handle will click into
position when correctly
fitted.
Using your Air Cordless
Press the on/off button
to turn the stick vac on.
NOTE: The brushbar should be ON for carpets and OFF for hard floors.
NOTE: The brushbar will not rotate when the stick vac is in the upright position.
26
Fit the battery onto the
stick vac (below the dirt
container). The battery
will click into position
when correctly fitted.
Place your foot on the
base and pull backwards
to recline.
Remove the filter insert
by pressing the dirt
container release button,
remove dirt container
off the stick vac, turn the
dirt container lid anti-
clockwise to remove the
filter insert.
Press the brushbar
button to activate the
brushbar if on carpets.
Remove tag attached
to filter, refit filter
with the tab at the
bottom into stick vac.
Stand the stick
vac in the upright
position to use the
hose. The brushbar
will stop.