Denon CDR-W1500 Mode D'emploi page 25

1. Relay play
With the relay play mode it is possible to play the disc in the CD side and the one in the CD-R side, relaying between them.
The programmed play and random play modes can be preset for the discs in the CD and CD-R units.
1
(Main unit)
CDR-W1500
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER
DUBBING DISPLAY TITLE /
8 9 NORMAL HIGH TIME SELECT CHARACTER
REMOTE SENSOR
POWER PHONES PHONES LEVEL
PLAY STOP PAUSE RELAY MODE OPEN / CLOSE ON OFF
-
1 2 3 5
MIN MAX
4 2 1
1
Load the discs you want to play in the CD and CD-R units.
Press the RELAY MODE button and select "Relay Play".
2
• The "RELAY" indicator lights.
Use the CD or CD-R section repeat 1/ALL button on the remote control unit to turn the repeat mode on or off.
• The 1-track repeat mode cannot be set in the relay mode.
• The relay operation is performed as shown below according to the combination of the relay and repeat modes:
Repeat mode
3
Repeat on: "REPEAT"
indicator lit
Repeat off CD side playback
Relay play starts when the CD unit's play button is pressed.
• The sound is output from the CD/CD-R output jacks.
4
• To quit the relay mode, press the relay mode button and select "Single Play".
• The disc in the side that is not operating can be replaced during relay playback.
NOTE:
• When relaying between a CD and CD-R, the digital data from the CD/CD-R digital output terminal is interrupted
momentarily. The digital input of the connected external device is temporarily unlocked at this time.
Select the CD side.
(Remote control unit)
_ DUBBING _
RELAY
1 NORMAL HIGH MODE
A ! " A ! " D # % D # %
1 2
J J （ ） M M ＊ ＋
4 5
S S . ／ V V : ;
7 8
[ = ] [ = ] { { ? }
10 + 10
TIME CLEAR INPUT FINALIZE 4 REC 8 9
REC
MULTI JOG
OPEN /CLOSE MENU PLAY STOP PAUSE
+
6
MENU
5 1 2 3
PUSH
ENTER
8 ENTER
STOP PLAY
2
PROG/DIRECT CALL 1 / ALL
1 3
RANDOM TIME TITLE
DISPLAY SEL. FADER INPUT
B
Relay operation
1 CD side playback 1 CD-R side playback
1 CD-R side playback 1 Stop
2. Mix mode
In the mix mode, programmed play and random play of the disc in the CD unit and the one in the CD-R unit can be performed as
if the two discs were a single disc.
(1) Mix programmed playback
CD CD-R
1
2
G & ' G & '
3
(Main unit)
,
P P −
6
Y Y ＜ ＞
PCM AUDIO TECHNOLOGY / COMPACT DISC RECORDER CDR-W1500
9
CLEAR CLEAR
DUBBING DISPLAY TITLE /
8 9 NORMAL HIGH TIME SELECT CHARACTER
PLAY STOP PAUSE RELAY MODE OPEN / CLOSE
7 1 2 3 5
9
PAUSE
3 4
A - B 5 2 1
CHARACTER
FINALIZE
1
Load the discs you want to play in the CD and CD-R units.
Press the RELAY MODE button and select "Mix Play".
2
• The "MIX" indicator lights.
Press the CD or CD-R unit's PROG/DIRECT button on the remote control unit to set the program mode.
3
• The "PROG" indicator lights.
Follow the procedure at "Programmed playback" on Page 21 to program the tracks in the order in which you want to
play them.
4
• You can program tracks for both the CD and CD-R units by using the CD/CD-R selector switch on the remote control
unit to switch between them.
• Up to 30 tracks can be programmed.
Mix programmed playback starts when the CD or CD-R unit's play button is pressed.
5
• The sound is output from the CD/CD-R output jacks.
• To quit the mix mode, press the relay mode button and select "Single Play".
NOTE:
• When relaying between a CD and CD-R, the digital data from the CD/CD-R digital output terminal is interrupted
momentarily. The digital input of the connected external device is temporarily unlocked at this time.
1
TIME CLEAR INPUT FINALIZE 4 REC 8 9
REMOTE SENSOR
POWER PHONES PHONES LEVEL MULTI JOG
ON
OFF OPEN /CLOSE MENU PLAY STOP PAUSE
- +
5 1 2 3
MIN MAX
PUSH
ENTER
1 5
ENGLISH
(Remote control unit)
4
CD CD-R
_ DUBBING _
RELAY
NORMAL HIGH MODE 2
A ! " A ! " D # % D # % G & ' G & '
1 2 3
J J （ ） M M ＊ ＋ P P , −
4
4 5 6
. : ;
S S ／ V V Y Y ＜ ＞
7 8 9
[ = ] [ = ] { { ? } CLEAR CLEAR
10 + 10
REC
6 7
MENU
8 ENTER 9
PLAY
STOP PAUSE
5
2 3
PROG/DIRECT CALL 1 / ALL A - B
3
RANDOM TIME TITLE CHARACTER
DISPLAY SEL. FADER INPUT FINALIZE
B
REMOTE CONTROL UNIT RC-278
25