Numark DJ|iO Guide D'utilisation Simplifié page 4

INSTALL THE DRIVERS
PC
Before you can begin using the DJ|iO with your computer, you must install the necessary drivers onto your
computer. The installation is quick and easy – please follow the instructions below:
1. Please insert the included installation disc into your computer's CD-ROM drive. DO NOT CONNECT THE
DJ|iO YET!
2. Double-click on Setup.exe.
3. Select your preferred language.
4. Click on Install the driver.
5. Read the User Agreement, select I accept the agreement, then click Install.
6. The installation procedure will begin. Please follow the on-screen instructions.
7. Once the installation has completed, you will see the screen on the left. Click Exit.
YOUR DJ|iO IS NOW READY TO USE!
MAC
Before you can begin using the DJ|iO with your computer, you must install the necessary drivers onto your
computer. The installation is quick and easy – please follow the instructions below:
1. Please insert the included installation disc into your computer's CD-ROM drive. DO NOT CONNECT THE
DJ|iO YET!
2. Open the CD to view its contents.
3. Please double-click Install DJ|iO to begin the installation procedure.
4. You will see the screen on the left appear. Click Continue.
5. Select your hard-drive as a destination for the driver installation and click Continue.
6. Click on Upgrade to begin the installation.
7. Enter your password and click OK.
8. You will see the warning displayed on the right.
Please select Continue Installation.
9. Click Restart to restart your computer and complete
the installation. Once your computer has restarted,
please plug in the DJ|iO.
YOUR DJ|iO IS NOW READY TO USE!
4