Shuffle - Pioneer XW-NAC1-k Mode D'emploi

03 iPod/iPhone playback
• When using the iPod/iPhone to adjust
sound volume, the adjustment will be
applied only to the sound produced from
this unit's speakers.
disconnected from this unit, the iPod's
sound volume will return to its original
setting.
When playing a single iPod/iPhone, press
iPod a or iPod b to switch to the respective
mode.
The following operations are possible for iPod/
iPhone, using the remote control.
Button What it does
Starts normal playback and pauses/
/
unpauses playback.
Pauses playback.

Press to skip to the start of the current

file, then previous files. Press and hold
to start fast reverse scanning.
Press to skip to the next file. Press and

hold to start fast forward scanning.
Use to set the listening volume.
VOLUME
+/–
The currently selected iPod/iPhone

SHUFFLE

tracks are played back in random
order (shuffle play).
The currently selected iPod/iPhone
REPEAT
tracks are played back repeatedly.
Use to access the iPod/iPhone
MENU
menu.
// Use to control the iPod/iPhone
menu.
ENTER
When no device is connected to the selected
iPod/iPhone connector ports (iPod a or iPod b)
and this unit is not operated for 30 minutes or
more after the respective function is selected,
power will automatically turn OFF.
Note
1 These adjustments are applied to all inputs to the unit.
2 During Cross Fade operation, /, and / are deactivated.
12
En
1
If the iPod/iPhone is
When playing two iPod/iPhone units
alternately, press
play.
2
SHUFFLE
Two iPod/iPhone units can be played
alternately with no break in sound (SHUFFLE
A bit before the currently playing iPod/iPhone
track ends, playback begins on the other iPod/
iPhone track and the volume is gradually
raised to fade in seamlessly (Cross fade).
During the SHUFFLE
2
track playback is set by the shuffle function.
1 Connect two iPod/iPhone units to the
iPod/iPhone connector ports (iPod a, iPod b),
then press iPod a or iPod b.
2 Press MENU to access the iPod/iPhone
menu.
3 Select the track area that you want to
play back, then press ENTER.
4 Press .
The SHUFFLE mode is set, and the SHUFFLE
2
indicator lights; the unit connected to the iPod
a connector port will playback.
A bit before the currently playing iPod/iPhone
track ends, the other iPod/iPhone unit begins
cross fade playback. The same operation is
repeated thereafter until all tracks on both
units have been played.
• To cancel the SHUFFLE
once again, or .
• The SHUFFLE mode will also be canceled
2
if the function is switched to any another
input (including iPod a or iPod b).
to perform SHUFFLE
2
operation, the order of
2
mode, press either
2
).
2
2