Electrical Safety Requirements - VARIXIO Pro Mag VB04ES Mode D'emploi

Wear your personal protective equipment in accordance with the hazard
category of the medium to be processed. There is a risk of:
•
Set up the device in a spacious area on a flat, stable, clean, non-slip, dry and fireproof
surface.
•
The feet of the device must be clean and undamaged.
•
The device is not suitable for manual operation.
•
The device may become hot when in use.
•
Check the device and accessories for damage prior to each use. Do not use damaged
components.
The VARIXIO® Pod capsule must always be closed when the device is in
operation. Switch off the device immediately if any material leaks from the
capsule and clean the device.
•
The working temperature of the device must not exceed 40°C.
•
Only use with VARIXIO® Pod capsules
•
Do not use the device in explosive atmospheres, it is not explosion proof.
•
With substances capable of forming an explosive mixture, appropriate safety measures
must be applied, e.g. working under a fume hood.
•
The device does not start up again automatically following a cut in the power supply.
Safe operation is only guaranteed with the accessories described in the "Cables and
•
Accessories" chapter.
For protection of the device
•
The voltage stated on the name plate must correspond to the mains voltage.
•
The device must only be operated with the original plug-in power supply unit.
•
Protect the device and accessories from bumps and bangs.
•
The device must only be opened by experts.
15. ELECTRICAL SAFETY REQUIREIMENTS
VARIXIO® Pro Mag is designed and intended for continuous operation working with universal
mains voltage of 100 – 240 V, 50 – 60 Hz.
VARIXIO® Pro Mag is protected against electric shock using grounding protection. The device is
grounded through the conductor of the power cable.
splashing liquids
-
projectile parts
-
body parts, hair, clothing and jewellery getting caught.
-
EN
11/73