KRATOS SAFETY FA 70 025 20 Guide D'utilisation page 12

1/ Check the integrity of all the components of the rescue kit, in particular make sure that
there are no marks, deformations, cracks, traces of corrosion, or wear. Carefully check the
eccentric cam on the descender to make sure it does not damage the rope. Carefully check
the rope along its entire length; it must not have any cuts, burns, frayed threads, etc. Check
the condition of the rope ends and the condition of the connectors.
For a proper verification, refer to the verification directions specific to each
component, in the individual instructions for them.
If you are in any doubt as to the condition of any of the components in the kit, do not use it
and/or return it to the manufacturer or a competent person authorized by the manufacturer.
2/ If all the components are in good condition, repack the kit as it was originally; the
diagram below indicates how to repack the kit.
Technical specifications of the kit:
Weight of the full kit:
Lengths:
Maximum weight of the person to
be evacuated:
AFTER INTERVENTION
FA 70 025 20
6.1 kg
20 m
130 kg
11
FA 70 025 30 FA 70 025 50
7 kg
30 m
130 kg
8.6 kg
50 m
130 kg