Intended Use; Technical Data - Bavaria BBC 43 Mode D'emploi D'origine

Anleitung_BBC_43_SPK7__ 29.08.14 07:49 Seite 19
Oil/petrol mixing bottle
n
Cutting line guard
n
Top part of steady grip holder
n
Cutting blade guard hood
n
Cutting blade
n
4x Allen screw M6x30, spring washer, washer
n
4x Allen screw M5x25, spring washer, washer
n
2x hex screw M6x16
n
3x line cutter fastening screw (L = 10mm)
n
Original operating instructions
n
Safety information
n

4. Intended use

The power scythe (using the cutting blade) is
designed for cutting young trees, strong weeds and
undergrowth.
The power trimmer (using the line spool with cutting
line) is designed for cutting lawns, grassed areas and
small weeds. The operating instructions as supplied
by the manufacturer must be kept and referred to in
order to ensure that the equipment is properly used
and maintained. Any use which is not expressly
permitted in the manual may result in damage to the
equipment and place the user in serious danger. Be
sure to observe the restrictions in the safety
instructions.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
Important. Due to the high risk of bodily injury to the
user, the petrol power scythe must not be used to
carry out the following work: to clean dirt and debris
off walkways, or to chop up tree or hedge clippings.
Moreover, the petrol power scythe may not be used to
level out high areas such as molehills. For safety
reasons, the petrol power scythe may not be used as
a drive unit for other work tools or toolkits of any kind.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.

5. Technical data

Engine type 2-stroke engine, air-cooled
Engine power (max.)
Displacement
Idle speed of engine
Max. engine speed
Max. cutting speed
Ignition
Drive
Weight (with empty tank)
Cutting line diameter
Cutting circle diameter of blade
Cutting line length
Cutting line diameter:
Tank capacity
Spark plug
Sound and vibration
Sound and vibration values were measured in
accordance with EN ISO 11806-1; EN ISO 22868;
EN ISO 22867.
Sound pressure level L
pA
Uncertainty K
pA
Sound power level L
WA
Uncertainty K
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Functions Right steady grip
Vibration emission value a h = 13.846 m/s
2
K uncertainty = 1.5 m/s
Functions Left steady grip
Vibration emission value a h = 10.602 m/s
2
K uncertainty = 1.5 m/s
GB
1.25 kW (1.7 HP)
43 ccm
-1
3.000 ± 300 min
-1
7.500 min
-1
8.300 min
Electronic
Centrifugal clutch
7.3 kg
40 cm
25.5 cm
2.5 m
2.4 mm
1.1 l
Torch L7T
100 dB(A)
1.5 dB
114 dB(A)
1.5 dB
2
2
19