How To Use It; Calling; Answering A Call; Automatic Line Disconnection - Depaepe Securaccess Compact Pmr Notice D'utilisation

SecurAccess Compact PMR – User Guide

2. How to use it

2.1. Calling

To go off-hook, simply press any of the off-hook/memory buttons. The unit will automatically turn to
"speakerphone" mode and the number stored into its memory will be dialled out, the orange icon
will light up and the message "call in progress" will be clearly announced.
If the other party does not answer and if several numbers have been stored into this memory, the unit
will automatically the following number stored, the orange icon
"next call" will be clearly announced. If chain dialling is activated, the sequence of number will be
repeated several times (see "Chain dialling" section § 12.7.).
The conversation will be held in the "speakerphone" mode, the blue icon
When the call is over, you can hang up the SecurAccess COMPACT PMR by pressing again the off-
hook memory button or, the unit will automatically hang up by detecting busy tone or a reversed
polarity, the blue icon

2.2. Answering a call

Each time the unit is called; the ringer will be activated except if a no ring setting has been selected.
To answer a call, press any of the off-hook buttons or let the unit go automatically off-hook once the
number of selected rings before automatic answer has been reached.
Once off-hook, the conversation will be held in the "speakerphone" mode.
When the call is over, you can hang up the SecurAccess COMPACT PMR by pressing again the off-
hook memory button or, the unit will automatically hang up by detecting busy tone or a reversed
polarity. When the unit is called, icons display and digital announcement are desactived.

2.3. Automatic line disconnection

This may happen during the dialling process or during a conversation in the following cases:
1. When pressing again one of the "off-hook" buttons.
2. No answer duration elapsed.
3. Timed conversation duration elapsed.
4. The other party hangs up and reversed polarity is detected.
5. Busy line tone detection (440 Hz).
6. No speech and no noise on line during 5 minutes.

2.4. Door latch activation

A party called by the SecurAccess COMPACT PMR can activate the door latch relay by entering the
4 digits stored code on a tone telephone keypad.
- If a wrong code is entered, 1 "beep" tone will be emitted, the green icon
message "code error" will be clearly announced. The unit will not hang up waiting for the right code,
- If a right code is entered, 2 "beep" tones will be emitted, the door latch will be activated, the green
icon will light up and the message "door open" will be clearly announced, the unit will hang up.
If the "fast opening" selection is activated, entering "0#" or "0*" will be enough to activate the door
latch.
Note: the door latch code can be stored in a one touch memory button of the called party.
Caution: activation of this code requires a Tone compatible telephone and PABX.
will blink end the message "call completed" will be clearly announced.
will light up and the message
will light up.
will blink and the
33