Installation; Before The Installation - Zanussi ZES3921IBA Notice D'utilisation

Problem
If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre. Give the data from the rating
plate. Give also three digit letter code for the
glass ceramic (it is in the corner of the glass
surface). Make sure, you operated the hob
correctly. If not the servicing by a service
A
MOD.
PROD.NO.
SER.NO
DATA
A) Stick it on Guarantee Card and send this
part (if applicable).
B) Stick it on Guarantee Card and keep this
part (if applicable).

Installation

WARNING!
Refer to Safety chapters.

Before the installation

Before you install the hob, write down the
information bellow from the rating plate. The
rating plate is on the bottom of the hob.
www.zanussi.com
Possible cause
The fuse is released.
B
MOD.
PROD.NO.
SER.NO
03 IT
DATA
MADE IN ITALY
Make sure that the fuse is the
cause of the malfunction. If the
fuse releases again and again,
contact a qualified electrician.
technician or dealer will not be free of charge,
also during the warranty period. The instructions
about the Service Centre and conditions of
guarantee are in the guarantee booklet.
Labels supplied with the accessories
bag
Stick the adhesive labels as indicated below:
C
MOD.
PROD.NO.
SER.NO.
0049
C) Stick it on instruction booklet.
Model .......................................
PNC .........................................
Serial number ...........................
Built-in hobs
Only use the built-in hobs after you assemble
the hob into correct built-in units and work
surfaces that align to the standards.
Remedy
TYPE
IP20
15