Installation - Zanussi ZEL63 Notice D'utilisation

• Do not let cookware boil dry to prevent the damage
to cookware and hotplate.
• Do not use the solid hotplate with empty cookware or
without cookware.
• Do not cover any part of the appliance with alumini-
um foil.
Disposal of the appliance
• To prevent the risk of physical injury or damage

Installation

Installation
Warning! You must read these!
• Make sure that the appliance is not damaged be-
cause of transportation. Do not connect a damaged
appliance. If it is necessary, speak to the supplier.
• Installation and connection of the appliance to the
power supply must only be carried out by qualified
personnel.
• Only use built-in appliances after you assemble the
appliance into correct built-in units and work surfa-
ces that obey the standards.
• Do not change the specifications or modify this prod-
uct. Risk of injury and damage to the appliance.
• Fully obey the laws, ordinances, directives and stand-
ards in force in the country where you use the appli-
ance (safety regulations, recycling regulations, elec-
trical safety rules etc.)!
• Keep the minimum distances to other appliances and
units!
• Install anti-shock protection, for example install the
drawers only with a protective panel directly below
the appliance!
• Prevent damage of the cut surfaces of the worktop
against moisture with a correct sealant!
• Seal the appliance to the worktop with no space left
with a correct sealant!
• Prevent damage of the bottom of the appliance from
steam and moisture, e.g. from a dishwasher or oven!
• Do not install the appliance adjacent to doors and be-
low windows! If not, hot cookware can be hit off the
hob when you open doors or windows.
• Disconnect the appliance from the electrical supply,
before you do maintenance work or clean.
10
All manuals and user guides at all-guides.com
– Disconnect the appliance from the power supply.
– Cut off the mains cable where it connects with the
appliance and discard it.
– Speak to your local authorised facilities for dispos-
al of your appliance.
Warning! Risk of injury from electrical current.
Carefully obey the instructions for electrical
connections.
• The electrical mains terminal is live.
• Make electrical mains terminal free of voltage.
• Install correctly to give anti-shock protection.
• Loose and incorrect mains plug and socket connec-
tions can make the terminal become too hot.
• A qualified electrician must install the clamping con-
nections correctly.
• Use a strain relief clamp on cable.
• Use the correct mains connection cable and replace
the damaged mains cable with proper special cable.
Speak your local Service Force Centre.
Manufacturer is not responsible for any injury to per-
sons and pets or damage to property caused by failure
to obey these requirements.
Electrical connection
• Ground the appliance according to safety precautions.
• Make sure that the rated voltage and type of power
on the rating plate agree with the voltage and the pow-
er of the local power supply.
• Any electrical component must be installed or re-
placed by the Service Force Centre technician or quali-
fied service personnel.
• Always use a correctly installed shockproof socket.
• Make sure that there is an access to the mains plug
after installation.
• Do not pull the mains cable to disconnect the appli-
ance. Always pull the mains plug.
• The appliance must not be connected with an exten-
sion cable, an adapter or a multiple connection (risk