From Single Sheet To Fanfold Paper Mode - Tally T2240/9 Manuel D'utilisation

Settings (II)
Turn paperlever
Load paper from
Single
Online Single
From single sheet to
fanfold paper mode
Online Single
Adjust Paperway
Menu Char
Single
*
Set Exit
20
Set the Paper Type Selection Lever to Cut Sheet Paper mode.
Online
Setup
In the display appears...
Stand the Paper Tray up and pull up the Paper Extension Trays (see page 10).
Online
Place a sheet of paper aligned to the Left Paper Guide, and adjust the Right Paper
Guide to the right edge of the paper.
Setup
Insert the paper between the Left and Right Paper Guides. The paper is auto-
matically fed to the print start position (see page 11).
Press the Online
Online
Setup
When single sheets were in use and you want to change over to fanfold paper mode, proceed as
described below.
Make sure that fanfold paper is loaded. Refer to page 12
Pull down the Paper Extension Trays and fold the Paper tray down.
Online
Press the Setup
Setup
Press the Paperway
Online
Setup
< >
Press or
Online
The currently valid setting (Single) is marked by a "
Setup
key to make the printer ready for operation.
key. The printer changes to Setup mode.
key. The printer changes to the paper path menu.
to change to Trac.1 (fanfold paper) mode.
Quick start-up
(Loading Fanfold Paper) for details.
*
".