Package Contents; Product Overview - Lindy Quad View KVM Switch Pro 32327 Guide D'installation Rapide

Quick Installation Guide
Introduction
We are glad that you have chosen a LINDY product and thank you for having placed your trust in us. You can rely
on our products and our good service at any time.
The LINDY Quad View KVM Switch Pro simultaneously displays video signals from four digital sources on a single
screen as well as giving individual Keyboard & Mouse control over connected computers. In addition a second
display can be connected (Full Screen Mode only!), so that you can directly control or work on one of the
computers without having to disrupt the monitoring of the other connected computers. An optional Remote IP
Module (LINDY No. 32328) is available which allows you to create a Remote Console, giving you full remote
control over the connected computers at distances of up to 100m (200m via Gigabit Ethernet Switch).
The complete description of the functions and feature of this switch is available in the full manual you can easily
download from our website www.lindy.com in the page dedicated to this product.

Package Contents

 1 x Quad View KVM Switch Pro
 1 x IEC Power Adapter 100 - 240VAC / 12V 5.0A (5.5/2.1mm DC connector)
 1 x IEC mains cable
 1 x LINDY Manual (QIG)
 1 x RJ45 to DB9 female (RS232) serial cable
 4 x DVI-D Cable 2m long
 4 x USB A/B m/m cable 1.80m long
 4 x Audio Stereo Cable (Jack 3.5mm m/m) 1.80m long
 1 x 19" Rack Mount Kit (brackets & small screws)

Product Overview

Please refer to the following overview to explore the basic functions of this product. To get a full explanation of all
the features of this product please check the full manual which you can find in our website www.lindy.com

Front Panel View
1 – USB 2.0 ports to connects USB devices that can be used with of the connected PCs
2 – OSD menu button to display the menu to the screen. It also acts as Enter key when the OSD is already open.
3 – Computer selection buttons to let you select the PC to be controlled (1, 2, 3 and 4). If the button is lit a PC
is connected and active on that port.
These buttons also act as cursor arrows (///) when the OSD menu is open.
4 – Display Mode buttons to be used to select the display mode to be shown on the main console screen:
Full View – Only the selected PC's video signal will be shown on the main screen
PIP (Picture In Picture) View – Shows a main picture from one PC and small picture from another
PC (you can choose both the channels from the OSD Menu).
Quad View – Shows all the 4 channels in a single screen.
PAP (Picture and Picture) View – Shows a main picture on the left side and the other 3 channels
on the right side of the screen.
5 – Display Mode Menu button to directly open the OSD menu where you can choose the desired display mode
6 – Restart button to be pressed with a paperclip to hard reboot the unit
English