Assembling The Blower - Stihl BG 55 Notice D'emploi

English
To reduce the risk of fire and damage to
hearing, do not operate your machine if
the muffler is damaged or missing. –
Do not touch a hot muffler since burn
injury will result.
Maintenance, replacement, or repair of
the emission control devices and
systems may be performed by any
nonroad engine repair establishment or
individual. However, if you make a
warranty claim for a component which
has not been serviced or maintained
properly or if nonapproved replacement
parts were used, STIHL may deny
coverage.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of the instruction
manual.
8

Assembling the Blower

Mounting the Blower Tube
3
2
Push the blower tube (1) with lug (2)
N
into the fan housing stub (3) and
rotate it in the direction of the arrow
to lock in position.
1
Push the nozzle (4) onto the blower
N
tube (1) as far as lug (5),
position (a) (long) or position (b)
(short), and rotate the nozzle in the
direction of the arrow to it lock in
position.
BG 55, BG 65, BG 85, SH 55, SH 85
1
5
4
a
b