Assembling The Vacuum Shredder - Stihl BG 55 Notice D'emploi

Removing the Blower Tube
6
Use a suitable tool to lift the tab (6)
N
on the fan housing stub (3).
Rotate the blower tube in the
N
direction of the arrow and then pull it
out.
See "Assembling the Vacuum Shredder"
for installation and removal of the
vacuum attachment.
BG 55, BG 65, BG 85, SH 55, SH 85
Assembling the Vacuum
Shredder
The vacuum attachment is available as
a special accessory.
Fitting the Elbow
3
2
From inside the catcher bag (2),
N
push the elbow (1) through the
intake opening and pull it outwards
until it is firmly seated.
Attach the carrying strap.
N
3
2
1
Push the elbow (1) into the catcher
N
bag (2) as far as the mark and
secure it with the Velcro strip (3).
Loosen the screw (4).
N
English
1
4
9