Performing Settings - TESTO 720 Mode D'emploi

5.4 Performing settings

1
To open configuration mode:
✓
The instrument is switched on and is in measurement
view. Hold, Max or Min are not activated.
Press and hold
changes.
- The instrument is now in configuration mode.
You can change to the next function with
You can leave configuration mode at any time. To do
so, press and hold
instrument has changed to measurement view. Any
changes that have already been made in configuration
mode will be saved.
2
To set the alarm function:
✓
Configuration mode is opened, ALARM is lit.
Select the desired option with
1
with :
· oFF: Switches the alarm function off.
· on: Switches the alarm function on.
oFF was selected:
➫
Continue with objective
.
FUNCTION
on was selected:
Use /
2
threshold ( ) and confirm with
Use /
3
threshold ( ) and confirm with
(for approx. 2s) until the display
(for approx. 2s) until the
T
O SET THE MAX
to set the value for the upper alarm
to set the value for the lower alarm
5. Operation 27
.
/ and confirm
./ .
MIN PRINT
.
.