Erasing A Part Of A Track (A-B Erase Function) - Sony MDS-JE320 Mode D'emploi

Editing Recorded MDs
Erasing all tracks on an MD
Erasing a recordable MD deletes the disc name, all
recorded tracks, and titles.
1
While the deck is stopped, press EDIT/NO
repeatedly until "All Erase ?" appears in the
display.
2
Press YES.
All tracks in the music calendar start flashing.
3
Press YES again.
When the disc name, all recorded tracks, and titles
on the MD have been erased, "Complete" appears
for a few seconds and the music calendar
disappears.
To cancel the Erase Function
Press EDIT/NO or p.
z
You can undo the Erase Function
Use the Undo Function immediately after you erased
the track (see page 23).
EN
18
Erasing a Part of a Track (A-B
Erase Function)
You can specify a portion within a track and erase the
portion with ease. It is convenient when erasing
unnecessary sections after recording satellite broadcast
or FM broadcast.
Example: Erasing a part of track A
Point A Point B
Track
1
number
A A
#1 #2
Erasing
1
A (#1+#3)
EDIT/NO
1
While playing a disc, press P at the starting point
(point A) of the portion to be erased.
2
Press EDIT/NO repeatedly until "A-B Erase ?"
appears in the display.
3
Press YES.
"Rehearsal" alternates with "Point A ok?" in the
display and the starting point A of the portion to
be erased plays back repeatedly.
4
If point A is incorrect, press EDIT/NO. (If it is
correct, go to Step 7.)
5
While monitoring the sound, turn AMS to find
point A.
"Rehearsal" alternates with "Point A ok?" in the
display and point A is played back repeatedly.
Point A can be moved within a maximum range
of –128 to +127 steps of about 0.06 second each
within a track.
6
If point A is still incorrect, repeat Step 5 until it is
correct.
2 3
A
B C
#3
2 3
B C
≠ AMS ± )
≠ ±
0 )
§
· P p r
P
YES