Rear Panel - VOX Amplification MINI GO 3 Manuel D'utilisation

Program section (VOX MINI GO 50 only)
21. PROGRAM button, LED
21
Use this button to choose a program. Each time the
PROGRAM button is pressed, the PROGRAM LED turns
green
Manual mode" on page 10.) This button is also used to
save new programs. (Refer to "Saving a program" on page
10.)
Power/AUX IN/PHONES Section
22. (Power) button, LED
Pressing and holding down this button enables you to turn
the power on or off. The power LED will light up when the
power is turned on.
22
The color of the power LED varies depending on the type
of the connected power supply equipment (maximum
current that can be consumed by this instrument).
Green: Lights up when the current of up to 3A can be
23
consumed by connecting the AC adapter supplied
with this product to the DC19V terminal (DC 12V
24
terminal for VOX MINI GO 3/10) or by the battery
connected to the DC 5V IN terminal.
Orange: Lights up when the current of up to 1.5A can
23. AUX IN jack
21
Connect an external audio device to this jack. This enables you to conveniently
connect an audio player and play your guitar along with the player's output.
24. PHONES jack
Use this jack if you're plugging directly in to a mixer, recording device, or if
you're using headphones. The output signal from this jack is taken before
the power amp, and the character of the guitar amp cabinet is applied to it.
Connecting headphones to this jack will mute the internal speaker.
Be sure to make a stereo connection at the PHONES jack.
orange red Off. (Refer to "User programs and
be consumed depending on the equipment
connected to the DC 5V IN terminal.

Rear Panel

VOX MINI GO 50
25 26 27
25. Connector protection bar (VOX MINI GO 10/50)
Do not use this protection bar to carry this instrument. To carry the
instrument, use the carry strap provided with this product.
26. DC 19V jack* (*DC 12V jack at VOX MINI GO 3/10)
Connect this jack to the included AC adapter.
The AC adapter should only be used with the main unit. Do not use the
adapter with other devices since doing so may cause a malfunction.
27. DC 5V IN jack (USB type-C connector)
Connect a commercially available mobile battery.
Noise may be heard when the power is supplied from a commercially
available USB AC adapter, so use a mobile battery.
This terminal is only used for input. It cannot supply power to another
device.
Not compatible with USB Power Delivery (USB PD).
28. FOOT SW jack (VOX MINI GO 10/50)
Connect the dedicated foot switch VFS3. For details, refer to "Using the foot
switch" on page 11.
6
VOX MINI GO 3
28
26 27