Sony IT-ID20 Mode D'emploi page 32

Looking at the Caller ID list (continued)
Notes
• Memory display of the Caller ID data and Phone Directory can be switched
by pressing (CALLER ID/DIRECTORY). If the Caller ID data isn't displayed in
step 1, press (CALLER ID/DIRECTORY) to switch the display.
• If a 21st call is received, the oldest data is automatically erased.
• "NEW" data will not be changed to "OLD" data unless all "NEW" data is
viewed at one time. If only some "NEW" data is viewed, that data will not be
counted as "OLD" data if there is "NEW" data that has not yet been viewed.
• When you have checked all data by pressing v, "END OF LIST" appears.
Tip
When there is "NEW" data, the NEW CALL/MESSAGES lamp flashes.
About the "REPEAT" display
SMITH JOHN
32 US Caller ID Features
"REPEAT" appears if there are more than
two calls from the same caller. The older data
will be replaced by the new data, so the calls
are counted as only one call (for "NEW" calls
only). When all "NEW" data is viewed,
"REPEAT" goes off.