Sony IT-ID20 Mode D'emploi page 13

6
Enter three digits of the local area code using
the dialing keys.
7
Press (PGM).
The number next to the selected number will
flash.
Repeat steps 5 to 7 to enter a local area code
into another number, if necessary.
To end the setting, press (ERASE/CLEAR).
Note
Do not allow more than 20 seconds to elapse between each step of the
procedure.
To change the local area code
1
Display the local area code you want to change by steps
from 1 to 5 on page 12.
The current local area code appears on the display.
2
Enter a new local area code by pressing the dialing keys.
3
Press (PGM).
The display returns to "NEW OLD" of the initial mode.
Tip
You can also correct a digit in step 2. Press V or v until the digit to be corrected
flashes and enter a digit by pressing the dialing keys.
When you do not use the entered local area code
Enter "000" by pressing the dialing keys in step 2 above.
#1 #2 #3 #4 #5
Getting Started
US
13